542
Using the Clock Appendix D
Setting Only the Seconds
It is also possible, by using AR 2113, to simply set the seconds to “00” without going through a complicated
procedure. When AR 2113 is turned ON, the clock time will change as follows:
If the seconds setting is from 00 to 29, the seconds will be reset to “00” and the minute setting will remain the
same.
If the seconds setting is from 30 to 59, the seconds will be reset to “00” and the minute setting will advance by
one.
When the time setting is complete, AR 2113 will turn OFF automatically.
To Next Page
Loading...
