OMRON PART 1: CX-Programmer
CX-Programmer_Page (xxxii)
CX-Net (CX-Server Network Configuration Tool)
• Accessing up to Eight Network Levels (Set in the Routing Table)
Previous version (Ver. 3.3) New version (Ver. 4.0)
FINS commands could be
used to access nodes up to
three network levels away,
including the local network.
If a CS/CJ-series PLC of Ver. 2.0 or later is used, FINS commands can be used to
access nodes up to eight.
To Next Page
Loading...
