Maintenance Console Location
9.23 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
PC Programming Manual References
9.24 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port— Caller ID Detection
Feature Guide References
2.19.1 Caller ID
Caller ID—Caller ID Signalling
Selects the type of Caller ID signalling provided by the telephone company.
Value Range
FSK, FSK (with Visual Caller ID), DTMF
Maintenance Console Location
9.23 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.19.1 Caller ID
Caller ID—Max Receive Time
Specifies the maximum number of Caller ID series that are sent from the network.
Value Range
0 (no limit), 1, 2, 3
Maintenance Console Location
9.23 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.19.1 Caller ID
Caller ID—Caller ID (FSK) Carrier Detection
Enables the PBX to detect the carrier when receiving Caller ID. To enable this setting,
Caller ID—Caller ID
Signalling on this screen should be set to FSK.
Value Range
Disable, Enable
362 PC Programming Manual
9.23 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
To Next Page
Loading...
