Panasonic KX-TDA50

1.18 Proprietary Telephone (PT) Features
140 Feature Guide
External Feature Access (EFA) Used to send a flash/recall signal to the telephone company or host
PBX to access external features. (→ 1.10.7 External Feature Access
(EFA))
Call Park Used to park or retrieve a call in a preset PBX parking zone. (→ 1.12.2
Call Park)
Call Park (Automatic Park
Zone)
Used to park a call in an idle PBX parking zone automatically. (→ 1.12.2
Call Park)
Call Log Used to show a log of received calls. (→ 1.16.2 Incoming Call Log)
Log-in/Log-out* Used to switch between Log-in and Log-out status. (→ 1.2.2.6 Log-in/
Log-out)
Hurry-up Used to redirect the longest waiting call in the queue of an ICD group to
the overflow destination. (→ 1.2.2.3 Queuing Feature)
Wrap-up* Used to switch between Wrap-up/Not Ready and Ready modes. (→
1.2.2.6 Log-in/Log-out)
System Alarm Used to display a PBX error. (→ 2.4.3 Local Alarm Information)
Time Service* Used to change or display the current time mode (day/lunch/break/
night). (→ 2.2.4 Time Service)
Answer Used to answer an incoming call. (→ 1.10.4 Headset Operation)
Release Used to disconnect the line during or after a conversation, or to
complete a Call Transfer. (→ 1.10.4 Headset Operation)
Toll Restriction Used to change the Toll Restriction (TRS) level of other extension users
temporarily. (→ 1.8.3 Dial Tone Transfer)
Calling Line Identification
Restriction (CLIR)*
Used to switch between CLIP and CLIR service. (→ 1.25.2.2 Calling/
Connected Line Identification Presentation (CLIP/COLP) and Calling/
Connected Name Identification Presentation (CNIP/CONP)—by QSIG)
Connected Line Identification
Restriction (COLR)
Used to switch between COLP and COLR services. (→ 1.25.2.2 Calling/
Connected Line Identification Presentation (CLIP/COLP) and Calling/
Connected Name Identification Presentation (CNIP/CONP)—by QSIG)
Headset Used to turn headset mode on/off while idle.
Used to switch between hands-free mode and headset modes during a
conversation. (→ 1.10.4 Headset Operation)
Time Service Switching Mode
(Automatic/Manual)*
Used to switch between Automatic Switching and Manual Switching
mode. (→ 2.2.4 Time Service)
Two-way Record Used to record a conversation into your own mailbox. (→ 1.19.2 Voice
Mail DPT (Digital) Integration)
Two-way Transfer Used to record a conversation into the mailbox of a specified extension.
(→ 1.19.2 Voice Mail DPT (Digital) Integration)
One-touch Two-way Transfer Used to record a conversation into the mailbox of a specified extension
with a one-touch operation. (→ 1.19.2 Voice Mail DPT (Digital)
Integration)
Button Usage