Panasonic KX-TDA50 - Slot [1-1] MPR Card Property

4.7 Configuration [1]
Feature Guide 317
Fault-DIF: The card installed in the slot differs from the programmed card type.
Pre-Install: There is no card in the slot, but the card type is programmed for the slot.
Idle: There is no card in the slot, nor programming of the card type for the slot.
Programming References
4.7.8 Slot [1-1] Card Command
Feature Guide References
None
Version
Indicates the version of the installed card (reference only).
Default
Current version number
Value Range
Version number
Feature Guide References
None
4.7.2 Slot [1-1] MPR Card Property
The properties for the MPR card can be specified.
Memory Expansion Card:
Indicates whether an MEC card is mounted on the MPR card. To change the MEC card installation status,
click on this cell, then click OK in the dialog box that appears. Clicking on the Command button performs
the same function.
Removing the MEC card here also deletes related MEC card data.
Default
Current status
Value Range
None, Installed
Programming References
4.7.1 Slot [1-1]
Feature Guide References
None