4.8 System [2]
404 Feature Guide
4.8.13 Numbering Plan—Quick Dialing [2-6-4]
Quick Dialing numbers are used to call extensions or outside parties, or access certain features without
having to dial their full numbers, if they are properly programmed. A maximum of 80 Quick Dialing numbers
can be programmed.
Dial
Specifies the Quick Dialing number.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Programming References
None
Feature Guide References
1.6.1.5 Quick Dialing
2.3.5 Flexible Numbering/Fixed Numbering
Phone Number
Specifies the number to be dialed when the corresponding Quick Dialing number is used.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [, ] [Secret], P [Pause], and F [Flash])
Programming References
None
Feature Guide References
1.6.1.5 Quick Dialing
2.3.5 Flexible Numbering/Fixed Numbering
4.8.14 Numbering Plan—B/NA DND Call Feature [2-6-5]
Feature numbers used to access various PBX features can be programmed. The following features are
available while hearing a busy, DND, or ringback tone. Each feature must have a unique feature number.
To Next Page
Loading...
