4.9 Groups [3]
Feature Guide 487
Programming References
None
Feature Guide References
1.19.3 Voice Mail DTMF Integration
Extension Number of the SLT Port Connected to VM 1–24
Specifies the extension number of the SLT ports that belongs to the VM (DTMF) group.
To assign an extension port to a VM (DTMF) group, follow the steps below:
1. Type the extension number of the SLT port that belongs to the VM (DTMF) group.
2. Set the status of the extension port to "OUS", then "INS".
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Programming References
4.7.14 Extension Port [1-5] Port Command
Feature Guide References
1.19.1 Voice Mail (VM) Group
4.9.14 PS Ring Group [3-9]
PS ring group is a group of PS extensions that receives incoming calls. Each group has a floating extension
number and name. One PS can belong to multiple PS ring groups. A maximum of 32 PS ring groups can
be programmed, each containing up to 28 PS extensions.
Floating Extension No.
Specifies the floating extension number of the PS ring group.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Programming References
None
Feature Guide References
1.20.2 PS Ring Group
To Next Page
Loading...
