Panasonic KX-TDA50

1.1 Incoming Call Features
28 Feature Guide
[Ring Tone Patterns]
[Programming Example: Ring Tone Pattern Table]
Conditions
•"PT Ring off Setting" can be enabled or disabled through system programming. If disabled,
proprietary telephone (PT) users cannot turn the ringer off for their extensions.
1.1.3.3 Call Waiting
Description
A busy extension user can be alerted to a new call by Call Waiting. The busy extension user can then
answer the second call either by disconnecting the current call or placing it on hold.
One of the following notification methods can be assigned for each extension, depending on the type of
telephone being used and the type of call that is waiting.
a) Call Waiting Tone: A tone is heard through the handset or built-in speaker.
b) Off-hook Call Announcement (OHCA): The caller's voice is heard through the built-in speaker.
c) Whisper OHCA: The caller's voice is heard through the handset.
d) Off: No call waiting notification is given.
Call Type
Available Notification Method
DPT Other Telephone
Intercom Call Call waiting tone/OHCA/Whisper
OHCA/Off
Call waiting tone/Off
CO Line Call* Call waiting tone/Off
1 280 ms
Single
Double
Triple
S-Double
Table
No.
1
2
Timed
Reminder
Call
Back
LCS
Intercom
Call/Hold
Recall
Double
Single
TRG1
Single
Double
TRG... Port 1
Single
Double
Port ...
CO Line Call/Hold
Recall
Doorphone Call
External
Sensor