2.3 System Data Control
Feature Guide 241
Conditions
• Certain resources which are assigned a floating extension number can also be assigned a name (→
ICD Group Name [623], → Outgoing Message (OGM) Name [731]).
Feature Guide References
1.19.1 Voice Mail (VM) Group
2.3.1 PC Programming
2.3.7 Software Upgrading
Description
It is possible to upload software from a PC to the PBX to upgrade the following:
Conditions
• The software version of the MPR can be confirmed through system programming (→ Main Processing
(MPR) Software Version Reference [190]).
Group Incoming Call
Distribution (ICD)
Group
Used to call an ICD group (→ ICD Group Floating Extension
Number [622]). (→ 1.2.2.1 Incoming Call Distribution (ICD) Group
Features—OVERVIEW)
PS Ring Group Used to call a PS ring group. (→ 1.20.2 PS Ring Group)
VM (DPT) Group Used to call a VM (DPT) group (→ VM Group Floating Extension
Number [660]).
VM (DTMF) Group Used to call a VM (DTMF) group.
Data File Storing Area
Main Processing (MPR) software
data
Operating system data area on the Main Board
Default system programming data for
each country/area
Country/area data area on the Main Board
Language data for PT display Each language data area on the Main Board.
There are two types:
Type 1: Proprietary telephone (PT) display except for PT system
programming (→ 2.3.2 PT Programming) (five languages max.)
Type 2: PT system programming data (one language max.)
Cell Station (CS) software data Flash ROM on the CS
Resource Description
To Next Page
Loading...
