Panasonic KX-TDA50

4.17 Maintenance [11]
Feature Guide 643
010–019, 100–999: Disable
Value Range
Disable, Enable
Programming References
None
Feature Guide References
2.3.2 PT Programming
4.17.3 Miscellaneous [11-3]
Various settings for on-site and remote programming and diagnosis can be specified.
Analog Remote (Modem) Floating Extension Number
Specifies the floating extension number for analog remote maintenance. To enable this setting, an RMT card
must be installed, and Remote Programming on this screen must be enabled.
Default
599
Value Range
Max. 4 digits (consisting of 0–9)
Programming References
None
Feature Guide References
2.3.1 PC Programming
Remote Programming
Enables the system programming, diagnosis, and data upload from a remote location.
Default
Enable
Value Range
Disable, Enable
Programming References
None
Feature Guide References
2.3.1 PC Programming