4.3 Connect
292 Feature Guide
To connect using a modem
1.
From the Connect menu, select Modem.
2. Enter the settings as required, or choose a previously stored profile from the Profile Name drop-down
list.
3. Click OK.
4.3.4 Connect—Disconnect
Closes the connection between the Maintenance Console and the PBX. When this option is chosen, system
data is automatically backed up from the PBX to the SD memory card (see "4.4.1 Tool—SD memory
backup").
To disconnect
1.
From the Connect menu, select Disconnect.
2. Click OK.
New Creates a new, empty profile. Any unsaved modem data currently
being edited is lost.
Initial Sends the value entered in Command to the modem.
OK Begins connection using the modem.
Cancel Closes the current screen without connecting.
Button Function
To Next Page
Loading...
