Panasonic KX-TDA50

4.4 Tool
Feature Guide 295
To import system data
1.
From the Tool menu, point to Import, and then click the type of data to import.
2. Navigate to the folder containing the system data file you want to open.
3. Select the file.
4. Click Open to open the file.
A list of field names found in the imported file will be displayed.
5. For the Feature - Speed Dial and Caller ID table, when an MEC card is installed, select the Speed
Dial table to which to import the data (Basic Memory or Expanded Memory) from the drop-down list.
6. Click the name to select a field that you want to import.
7. Click Import to.
8. From the drop-down list, select the field in the destination table to receive this data.
Use the tables above for reference.
9. Click OK to link the fields.
If data in a field being imported does not match the required format for the import destination, an error
message will be displayed when the import operation is attempted, and the operation will be cancelled.
This can occur when, for example, the destination field can only accept numeric data, but the data being
imported contains alphabet characters, as the correct fields were not linked together.
10. Repeat steps 5 to 8 for other fields as required.
11. Click OK to perform the import operation.
4.4.5 Tool—Export
Allows several types of system data files or tables to be exported as comma-separated value (CSV) files.
These files can be used with the Import tool (see "4.4.4 Tool—Import") to update another PBX.
Except for Speed Dial and Caller ID, this option is only available at Installer level.
Note
The separator used in CSV files created using the Export tool is decided by the unit specified in List
Separator, in the Windows Regional Options Control Panel.
To export system data
1.
From the Tool menu, point to Export, and then click the type of data to export.
2. Navigate to the folder in which you want to save the file.
3. Enter a file name.
4. Click Save to display the Export window.
5. For the Feature - Speed Dial and Caller ID table, when an MEC card is installed, select the Speed
Dial table from which to export the data (Basic Memory or Expanded Memory) from the drop-down list.
A list of field names that can be exported will be displayed.
6. Click the check box beside the name of each field that you want to export.
7. Click OK.
ARS - Routing Plan
Data Type Import Destination Reference
(no fields to select) (no fields to select) 4.14.3 Routing Plan Time [8-3]