4.12 Feature [6]
Feature Guide 599
4.12 Feature [6]
4.12.1 Speed Dialing & Caller ID—Main Table [6-1-1]
The System Speed Dial Table is used to store frequently dialed numbers as well as callers that should be
automatically routed to certain extensions when they call (Calling Line Identification [CLI] distribution). The
System Speed Dialing Table is available for all extension users when making or receiving a call.
A maximum of 1000 System Speed Dialing numbers (e.g., telephone numbers, feature numbers) can be
programmed with other related parameters. Select the desired System Speed Dialing numbers from the
System Speed Dialing No. list.
Memory
Selects whether the original or additional System Speed Dial Table will be programmed. This option is only
displayed when an MEC card is installed. Whether a tenant uses the basic or expanded System Speed Dial
Table depends on the setting of System Speed Dial in 4.12.7 Tenant [6-6].
Value Range
Basic Memory, Expanded Memory
Programming References
4.12.7 Tenant [6-6]—System Speed Dial
Feature Guide References
1.6.1.4 Speed Dialing—Personal/System
1.16.1 Caller ID
Name
Specifies a name for the System Speed Dialing number. As for the available characters, refer to the
character code table described in section 3.2.1 Installing and Starting KX-TDA50 Maintenance Console.
Default
Not stored.
Value Range
Max. 20 characters
Programming References
None
Feature Guide References
1.6.1.4 Speed Dialing—Personal/System
1.16.1 Caller ID
To Next Page
Loading...
