4.4 Tool
Feature Guide 293
4.4 Tool
4.4.1 Tool—SD memory backup
Saves system data from the PBX to the SD memory card. Backup begins as soon as this option is chosen.
To back up system data
•From the Tool menu, select SD memory backup.
4.4.2 Tool—NDSS Link Data Clear
Clears NDSS Link Data stored in the connected PBX. While this tool clears both monitor extension and
monitored extension data, it only clears it at the connected PBX. To clear this data at other PBXs in the
network, it is necessary to run this tool at those PBXs.
To clear the NDSS Link Data
•From the Tool menu, select NDSS Link Data Clear.
A confirmation screen will be displayed.
•Click OK to clear the data.
•Click Cancel to keep the data, and close the screen.
4.4.3 Tool—Extension List View
Displays a list of all programmed extension numbers and types.
The types that can be displayed are as follows:
Type Detail
Intercom Wired Extension
VM Voice Mail
Portable Station Wireless Extension (Portable Station)
ICDG Incoming Call Distribution Group
WG PS Ring Group
VM (DPT) VM (DPT) Group
VM (DTMF) VM (DTMF) Group
Pager External Pager
MODEM Analog Modem
OGM (DISA) DISA
DSS DSS Console
DPT-I/F CS PT-interface CS
To Next Page
Loading...
