Panasonic KX-TDA50

1.18 Proprietary Telephone (PT) Features
Feature Guide 139
1.18.2 Flexible Buttons
Description
Flexible buttons are customized through either system or personal programming. The following types of
flexible buttons are found on proprietary telephones (PTs), DSS Consoles, Add-on Key Modules, and/or
portable stations (PSs):
a) Flexible CO buttons
b) Flexible Direct Station Selection (DSS) buttons
c) Programmable Feature (PF) buttons
[Button Usage]
Button Usage
Single-CO (S-CO) Used to access a specified CO line for making or receiving calls. (→
1.5.5.3 CO Line Access)
Group-CO (G-CO) Used to access an idle CO line in a specified CO line group for making
calls. Incoming calls from CO lines in the assigned CO line group arrive
at this button. (→ 1.5.5.3 CO Line Access)
Loop-CO (L-CO) Used to access an idle CO line for making calls. Incoming calls from any
CO line arrive at this button. (→ 1.5.5.3 CO Line Access)
Direct Station Selection (DSS) Used to call an extension with a one-touch operation. (→ 1.5.3 Intercom
Call)
Network Direct Station
Selection (NDSS)
Used to access an extension at another PBX within the same network.
(→ 1.25.2.3 Network Direct Station Selection (NDSS) (KX-TDA5920
required))
One-touch Dialing Used to call a preprogrammed party or access a feature with a one-
touch operation. (→ 1.6.1.2 One-touch Dialing)
Group Directory Number (G-
DN)
Used to access a specified incoming call distribution (ICD) group for
making or receiving calls. (→ 1.2.2.1 Incoming Call Distribution (ICD)
Group Features—OVERVIEW)
Message Used to leave a Message Waiting indication or call back the party who
left the Message Waiting indication. (→ 1.17.1 Message Waiting)
FWD/DND (External/Internal/
Both)*
Used to set the FWD or DND feature for the extension. The feature is
applied to CO line calls, intercom calls, or both. (→ 1.3.1.1 Call
Forwarding (FWD)/Do Not Disturb (DND)—OVERVIEW)
Group FWD (External/Internal/
Both)
Used to set the FWD feature for a specified ICD group. The feature is
applied to CO line calls, intercom calls, or both. (→ 1.3.1.1 Call
Forwarding (FWD)/Do Not Disturb (DND)—OVERVIEW)
Account Code Entry (Account) Used to enter an account code. (→ 1.5.4.3 Account Code Entry)
Conference Used to establish a multiparty conversation. (→ 1.13.1.2 Conference)
Terminate Used to disconnect the current call and make another call without
hanging up. (→ 1.10.6 Flash/Recall/Terminate)