Panasonic KX-TDA50

4.14 ARS [8]
616 Feature Guide
Default
1
Value Range
1–16
Programming References
None
Feature Guide References
1.9.1 Automatic Route Selection (ARS)
4.14.3 Routing Plan Time [8-3]
The start times of a maximum of 4 different time blocks (Time-A through D) can be programmed for each
day of the week. There are 16 Routing Plan Tables, and each Routing Plan Table can have its own time
blocks. Select the desired Routing Plan Table number from the Routing Plan list.
Time-A–Time-D—Setting
Enables the setting of the start time for each time block.
Default
Time-A–Time-C: Enable
Time-D: Disable
Value Range
Disable, Enable
Programming References
None
Feature Guide References
1.9.1 Automatic Route Selection (ARS)
Time-A–Time-D—Hour, Minute
Specifies the start time for each time block.
Default
Time-A: 8:00, Time-B: 17:00, Time-C: 21:00, Time-D: Not applicable.
Value Range
00:00–23:59
Programming References
None