4.1 Introduction
286 Feature Guide
"In service" means that the card is installed correctly in the PBX, and is capable of being used normally.
"Out of service" means that the card is installed correctly in the PBX, but has been temporarily removed
from use. This allows settings to be modified or software to be upgraded.
To change the status of a card
1.
Open the Configuration—Slot screen of the Maintenance Console (see "4.7.1 Slot [1-1]").
2. Select the card command of the desired card:
• Click the desired cell in the Status column.
• Use the arrow keys to select the desired cell in the Status column, and then click Command.
3. Select the desired status:
•Click INS to set the card to in-service status.
•Click OUS to set the card to out-of-service status.
4.1.6 Display Options
The View and Window menus provide options to control the display of items within the Maintenance
Console.
•View
– Toolbar: Displays or hides the toolbar of commonly used buttons.
– Status Bar: Displays or hides the bar at the bottom of the Maintenance Console window.
• Window
– Cascade: When multiple data screens are open, displays all open screens overlapped, with the
title bars visible.
– Tile(Horz): When multiple data screens are open, displays all open screens side by side.
– Tile(Vert): When multiple data screens are open, displays all open screens vertically.
To Next Page
Loading...
