Panasonic KX-TDA50

4.8 System [2]
Feature Guide 403
Feature Guide References
1.26.1 Computer Telephony Integration (CTI)
2.3.5 Flexible Numbering/Fixed Numbering
Centralized BLF Monitor Cancel
Specifies the feature number used to cancel monitoring of an extension using an NDSS button.
Default
*784
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Programming References
4.15.1 TIE Table [9]
Feature Guide References
1.25.2.3 Network Direct Station Selection (NDSS) (KX-TDA5920 required)
4.8.12 Numbering Plan—Other PBX Extension [2-6-3]
Other PBX extension numbers can be used to call the extensions connected to the PBXs at different
locations in a TIE line network. A maximum of 16 leading digits can be programmed.
Dial
Specifies the other PBX extension number.
Default
Not stored.
Value Range
Max. 3 digits (consisting of 0–9, *, and #)
Programming References
4.15.1 TIE Table [9]—Leading Number
Feature Guide References
1.25.1.3 Extension Number Method (Access without PBX Code)
2.3.5 Flexible Numbering/Fixed Numbering