Panasonic KX-TDA50

4.12 Feature [6]
Feature Guide 607
Value Range
Off: ARS is disabled.
On for Local Access Operation: ARS operates when an extension user makes a call using any Idle Line
Access method.
On for Any CO Access Operation: ARS operates when an extension user makes a call using any CO Line
Access method.
Same as System Setting: The setting specified in ARS Mode in System Setting [8-1] is applied.
Programming References
4.14.1 System Setting [8-1]
Feature Guide References
1.9.1 Automatic Route Selection (ARS)
2.2.3 Tenant Service
System Speed Dial
Specifies which system speed dial table is used by the tenant. This setting is only available when an MEC
card is installed.
Default
Basic Memory
Value Range
Basic Memory: PBX basic system speed dialing numbers are used.
Expanded Memory: Expansion system speed dialing numbers are used.
Programming References
4.12.1 Speed Dialing & Caller ID—Main Table [6-1-1]
Feature Guide References
1.6.1.4 Speed Dialing—Personal/System
4.12.8 Hotel [6-8]
Various settings related to the hospitality features of the PBX can be set.
Hotel Operator
Specifies the number of the extension designated as the hotel operator.
Default
101
Value Range
Max. 4 digits (consisting of 0–9)