1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features
Feature Guide 49
Feature Guide References
1.18.1 Fixed Buttons
1.18.2 Flexible Buttons
User Manual References
3.1.2 Settings on the Programming Mode
1.3.1.2 Call Forwarding (FWD)
Description
Extensions and incoming call distribution (ICD) groups can forward their calls to preset destinations. There
are four Call Forwarding (FWD) modes, described below.
Depending on the type of incoming call (intercom or CO line call), it is possible to set different destination
for each.
Mode Description
All Calls All calls are forwarded.
Follow Me: When an extension user fails to set this feature before leaving
the desk, this feature can be set from the destination extension.
Busy Calls are forwarded when the extension user's line is busy.
No Answer Calls are forwarded when the extension user does not answer within a
preprogrammed time (→ Call Forwarding—No Answer Time [605]).
Busy/No Answer Calls are forwarded when the extension user's line is busy or the user does
not answer within a preprogrammed time (→ Call Forwarding—No Answer
Time [605]).
To Next Page
Loading...
