Panasonic KX-TDA50

4.7 Configuration [1]
350 Feature Guide
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Programming References
4.7.17 IP-GW Port [1-6] Port Command
Feature Guide References
None
4.7.17 IP-GW Port [1-6] Port Command
Commands for the IP-GW ports can be programmed.
INS
Puts the port in service.
Default
Not applicable.
Value Range
Not applicable.
Programming References
4.7.16 IP-GW Port [1-6]
Feature Guide References
None
OUS
Takes the port out of service. This enables a temporal non-use of the port, for example, for the purpose of
repair.
Default
Not applicable.
Value Range
Not applicable.
Programming References
4.7.16 IP-GW Port [1-6]
Feature Guide References
None