Panasonic KX-TDA50

1.5 Making Call Features
64 Feature Guide
1.5.4.7 Special Carrier Access Code
Description
If the PBX has access to multiple telephone companies, a Special Carrier Access code assigned through
system programming (→ Special Carrier Access Code [303]) is required every time a CO line call is made.
A pause of a preprogrammed length (→ LCOT Pause Time [416]) will be automatically inserted between
the user-dialed Special Carrier Access code and the following digits. (→ 1.5.4.5 Pause Insertion)
Conditions
• TRS
TRS checks only the dialed telephone number excluding the Special Carrier Access code. (→ 1.8.1 Toll
Restriction (TRS))
• If this PBX is installed behind an existing host PBX:
A Special Carrier Access code and a Host PBX Access code should be assigned separately—these
codes cannot be assigned together as one code. (→ 1.5.4.6 Host PBX Access Code (Access Code to
the Telephone Company from a Host PBX))
1.5.5 Seizing a Line Features
1.5.5.1 Seizing a Line Features—OVERVIEW
Description
An extension user can select the line that is seized in order to make a call, using one of the following
features.
1.5.5.2 Line Preference—Outgoing
Description
Through personal programming, a proprietary telephone (PT) user can select the preferred method of
seizing a line (Preferred Line Assignment—Outgoing) that is used each time the user goes off-hook.
Feature Description Details in
Line Preference—
Outgoing
A user can select the line seized when going off-hook. • 1.5.5.2 Line
Preference—
Outgoing
CO Line Access A user can select the CO Line Access method every time
a CO line call is made.
• 1.5.5.3 CO Line
Access
Method Description
Intercom When an extension user goes off-hook, an extension line is selected
automatically.