Panasonic KX-TDA50

1.21 Administrative Information Features
Feature Guide 171
The following data can be controlled through system programming to adjust whether (or how) they are
printed or displayed by SMDR.
[Programmable Items]
(9) CD (Condition
Code)
Shows other call information using the following codes:
TR: Transfer
FW: Call Forwarding (FWD) to CO line
D0: Call using Direct Inward System Access (DISA) or TIE line
service
RM: Remote maintenance (modem) (→ 2.3.1 PC
Programming)
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual Caller ID)
(10) Cost Shows the call charge. This is not available if your telephone
company does not provide a call charge reporting service.
Item Description
Outgoing CO line call Controls whether outgoing CO line calls are shown. This setting is
common throughout the PBX (→ SMDR Outgoing Call Printing [804]).
Class of Service (COS) programming is also required.
Incoming CO line call Controls whether incoming CO line calls are shown (→ SMDR Incoming
Call Printing [805]).
Outgoing intercom call Controls whether outgoing intercom calls are logged.
Log-in/Log-out status Controls whether the Log-in/Log-out status of extensions is logged.
ARS dial Controls whether the user-dialed number or the ARS-modified number
is shown.
A Host PBX Access code ("=" followed by the access code) can be
shown (as supplementary information) only when the modified number
is selected in this setting. (→ 1.9.1 Automatic Route Selection (ARS))
Caller's identification Controls whether a caller's telephone number, name, number and name,
or nothing is shown. If "none" is selected, <I> will not be shown.
Secret dialing Controls the display of secret dialing, when ARS dial, above, is set to
show ARS-modified numbers. If enabled, numbers dialed secretly will be
shown as dots.
If ARS dial is set to show user-dialed numbers, secretly dialed numbers
are always shown as dots in SMDR, regardless of this setting.
Date order Controls the date format. (MM-DD-YY, DD-MM-YY, YY-MM-DD, or YY-
DD-MM)
Received call Controls whether the time of receiving an incoming CO line call is shown.
Answered call Controls whether the time of answering an incoming CO line call is
shown.
Room status Controls whether room status changes are shown.
Number in the
Pattern
Data Description