1.1 Incoming Call Features
Feature Guide 19
4. Intercept Routing
After a call has been directed to its DIL or CLI destination, the following Intercept Routing features, if
programmed, can redirect the call.
DISA
Analog Remote Maintenance
Idle Line Access no. + Phone no.
CO Line Group Access no. + CO Line Group no. +
Phone no.
Extension of Another PBX (via TIE Line, Access with PBX Code)
Extension of Another PBX (via TIE Line, Access without PBX Code)
Type Description Details in
No Answer (IRNA) If a called party does not answer a call within a
preprogrammed time period (Intercept time), the call
is redirected to a preprogrammed destination.
• 1.1.1.4 Intercept
Routing
Busy If a called party is already handling another call, the
new call is redirected to a preprogrammed
destination.
DND If a called party is in Do Not Disturb (DND) mode, the
call is redirected to a preprogrammed destination.
No Destination If a destination is not assigned, the call is redirected
to an operator.
• 1.1.1.5 Intercept
Routing—No
Destination
Destination Type Availability
To Next Page
Loading...
