Panasonic KX-TDA50

1.1 Incoming Call Features
Feature Guide 23
[Available Intercept Destination]
The following can be used as intercept destinations:
Conditions
• If the intercept destination is busy or in DND mode and therefore cannot receive the call:
a) When the call was intercepted via Intercept Routing—No Answer, the call is sent back to the
original destination and continues to ring at the original destination until answered.
•PS Ring Group
• VM Group (DTMF/DPT)
• External Pager (TAFAS)
The destination assigned to the CO line group
carrying the call (→ CO Line Group Intercept
Destination [470])
• DISA The destination assigned to the CO line group
carrying the call* (→ CO Line Group Intercept
Destination [470])
• Analog Remote Maintenance
• Idle Line Access no. + Phone no.
• CO Line Group Access no. + CO Line Group
no. + Phone no.
• Other PBX Extension (TIE with no PBX Code)
• Other PBX Extension (TIE with PBX Code)
Not assignable (Intercept Routing is not available.)
* Intercept Routing will redirect a call only if the Direct Inward System Access (DISA) line is busy. Once
a call reaches the destination extension using the DISA feature, the call can be redirected to the
Intercept Routing destination assigned to that extension.
Intercept Destination Availability
Wired Extension (PT/SLT)
PS
ICD Group
PS Ring Group
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analog Remote Maintenance
Idle Line Access no. + Phone no.
CO Line Group Access no. + CO Line Group no. +
Phone no.
Extension of Another PBX (via TIE Line, Access with PBX Code)
Extension of Another PBX (via TIE Line, Access without PBX Code)
When the original destination is: The Available Intercept Destination is: