Panasonic KX-TDA50

2.4 Fault Recovery/Diagnostics
Feature Guide 243
number will be displayed in order of highest priority to lowest. The System Alarm button light turns off
automatically after all error numbers have been displayed.
For details regarding errors and their solutions, refer to the Installation Manual.
[Error Example]
[Explanation]
Conditions
• System Alarm Button
Any flexible button can be customized as the System Alarm button.
• If an extension allowed to utilize this feature uses PC Console or PC Phone, the alarm information will
also be displayed on the PC.
• If an extension allowed to utilize this feature uses PC Console or PC Phone, the alarm information will
be sent to the preprogrammed party via PC Console or PC Phone. PC Console and PC Phone use e-
mail to send the information.
• The alarm information will be logged on the Station Message Detail Recording (SMDR) if enabled
through system programming.
• The PBX can be automatically diagnosed at a preprogrammed time everyday.
Installation Manual References
4.1.5 Troubleshooting by Error Log
Feature Guide References
1.18.2 Flexible Buttons
1.21.1 Station Message Detail Recording (SMDR)
Number in the Example Item Description
(1) Error Code Shows three-digit error code.
(2) Sub Code Shows five-digit sub code (XYYZZ).
X: Cabinet number (1–4)
YY: Slot number (00–11)
ZZ: Physical port number (01–08)
ERR #100 (10000)
(1)
(2)