4.1 Introduction
Feature Guide 283
Access to menu options within the Maintenance Console is also restricted depending on the Programmer
Code, and the current software mode (see "4.1.1 Software Modes"). When a menu option is limited to
certain access levels, this is noted in the initial description of that menu option, for example:
"This option is only available at Installer level."
If a sentence like this is not included, the menu option is available at all levels.
The target users for each access level are as follows:
The options available in each mode and access level are shown below.
The access levels are abbreviated as follows:
U: User; A: Administrator; I: Installer
A check mark indicates that the menu option is available for that access level.
Access Level User
User For end users
Administrator For system administrators
Installer For dealers and system installers
File
Menu Option Initial Batch Interactive
UA I UA I UA I
New
Open
Close
Save
Save As
eXit
Connect
Menu Option Initial Batch Interactive
UA I UA I UA I
RS-232C
USB
Modem
Disconnect
To Next Page
Loading...
