Panasonic KX-TDA50

4.7 Configuration [1]
320 Feature Guide
Programming References
4.7.1 Slot [1-1]
Feature Guide References
None
SLT Flash Detection
Enables the PBX to detect a flash signal an SLT user sent by pressing the hookswitch or the Flash/Recall
button.
Default
Enable
Value Range
Disable: The PBX disconnects the line to prevent placing the call on hold.
Enable: The PBX places the call on consultation hold.
Programming References
4.7.1 Slot [1-1]
Feature Guide References
None
Flash Timing - Min.
Specifies the minimum time before the PBX starts recognizing a hookswitch flash signal sent from an SLT.
Default
112 ms
Value Range
8 × n (n=3–63) ms
Programming References
4.7.1 Slot [1-1]
Feature Guide References
None
Flash Timing - Range
Specifies the length of time required by the PBX to recognize a hookswitch flash signal sent from an SLT.
Default
904 ms