Panasonic KX-TDA50

4.7 Configuration [1]
Feature Guide 323
Feature Guide References
None
Bell Detection—Bell Off Detection Timer
Specifies the minimum time required by the PBX to confirm that the bell signal is no longer sent from the
telephone company, before the PBX realizes the call is lost.
Default
6.0 s
Value Range
1.0 s–15.0 s
Programming References
4.7.1 Slot [1-1]
Feature Guide References
None
Pulse / DTMF Dial—DTMF Inter Digit Pause
Specifies the length of the DTMF inter-digit pause. This allows the telephone company to have enough time
to accept the dialed digits correctly.
Default
112 ms
Value Range
64 + 16 × n (n=0–11) ms
Programming References
4.7.1 Slot [1-1]
Feature Guide References
None
Pulse / DTMF Dial—Pulse Inter Digit Pause
Specifies the length of the pulse inter-digit pause. This allows the telephone company to have enough time
to accept the dialed digits correctly.
Default
830 ms
Value Range
630 ms, 830 ms, 1030 ms