Panasonic KX-TDA50

4.7 Configuration [1]
Feature Guide 339
Value Range
DTMF, Pulse
Feature Guide References
None
CPC Signal Detection Time—Outgoing, Incoming
Specifies the length of time required by the PBX to detect a CPC signal on outgoing or incoming CO line
calls before disconnecting the line .
Default
400 ms
Value Range
None, 6.5 ms, 8 × n (n=1–112) ms
Feature Guide References
None
DTMF Width
Selects the length of the DTMF tone sent to the analog CO line.
Default
80 ms
Value Range
80 ms, 160 ms
Feature Guide References
None
Pulse Speed
Selects the speed at which pulse dials are sent to the analog CO line.
Default
Low
Value Range
Low, High
Feature Guide References
None