Panasonic KX-TDA50 - Page 396

4.8 System [2]
396 Feature Guide
Data Line Security Set / Cancel
Specifies the feature number used for setting or canceling the Data Line Security (i.e., preventing or allowing
signals from other extensions during data transmission).
Default
*730
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Programming References
None
Feature Guide References
1.10.5 Data Line Security
2.3.5 Flexible Numbering/Fixed Numbering
Call Waiting Mode: Call from Extension
Specifies the feature number used for setting or changing the method of receiving a Call Waiting from an
extension.
Default
*731
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Programming References
None
Feature Guide References
1.1.3.3 Call Waiting
2.3.5 Flexible Numbering/Fixed Numbering
Call Waiting Mode: Call from CO
Specifies the feature number used for setting or canceling a Call Waiting from a CO line, doorphone, or a
call via an incoming call distribution group.
Default
*732
Value Range
Max. 4 digits (consisting of 0–9, *, and #)