Panasonic KX-TDA50

4.8 System [2]
Feature Guide 427
Programming References
None
Feature Guide References
1.12.1 Call Hold
SLT Hold Mode
Selects how to hold a line and transfer a call with an SLT.
Default
Mode 2
Value Range
Mode 1, Mode 2, Mode 3, Mode 4
Programming References
None
Feature Guide References
1.12.1 Call Hold
System CODEC
Selects the CODEC type for DPT and PS.
Default
Mu-Law
Value Range
A-Law, Mu-Law
Feature Guide References
None
Extension Clear : Call Waiting
Specifies whether the Call Waiting setting is cleared when the Extension Feature Clear feature is performed.
Default
Clear
Value Range
No Clear, Clear
Programming References
None