1.2 Receiving Group Features
46 Feature Guide
Conditions
• Available Extension as a Supervisor Extension
a) Only one supervisor extension can be assigned for each ICD group, but it need not belong to the
group.
b) An extension can be the supervisor extension of more than one ICD group.
• Available Paired DSS Console
The KX-T7640, KX-T7440, and KX-T7441 are available for this feature.
• Monitoring Date and Time Reset
Information displayed on the supervisor extension's PT can be reset manually. The date and time that
the reset was performed will be shown on the display ("Since 29 Jan", above), and all values will be
reset to 0.
• If a call to an ICD group is overflowed:
The supervisor extension's PT, if in idle status, will automatically change to monitor mode for the
corresponding ICD group. When the supervisor is already monitoring a group, the display will not
change.
• Other Features while in Monitor Mode
The supervisor extension can use other features (making calls, pressing the MESSAGE button, etc.)
even while in monitor mode. When each operation is finished, the display will return to monitor mode.
User Manual References
1.8.2 Incoming Call Distribution Group Monitor
To Next Page
Loading...
