Panasonic KX-TDA50

4.10 Extension [4]
560 Feature Guide
Number to Generate
Specifies the number of locations to be programmed.
A CLIP number will only be assigned to registered PS extensions, even if the number entered here is larger
than the total number of PS extensions.
Default
Total number of connected wired extensions
Value Range
1–total number of connected wired extensions
Programming References
4.10.9 Portable Station—Extension Settings [4-2-1]
Feature Guide References
1.25.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name
Identification Presentation (CNIP/CONP)—by QSIG
Deleting Digits
Specifies the number of digits to be deleted from the start of an extension number when using it as part of
the CLIP number.
Default
0
Value Range
0–4
Programming References
4.10.9 Portable Station—Extension Settings [4-2-1]
Feature Guide References
1.25.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name
Identification Presentation (CNIP/CONP)—by QSIG
Head of ID
Specifies a prefix number to be applied to all generated CLIP numbers.
Default
Not stored.
Value Range
Max. 16 digits (consisting of 0–9, *, and #)
Programming References
4.10.9 Portable Station—Extension Settings [4-2-1]