4.10 Extension [4]
Feature Guide 567
Value Range
None: The incoming call distribution group is selected manually.
All: All incoming call distribution groups that the PS belongs to.
Incoming Group: A specified incoming call distribution group
Programming References
4.10.13 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy
Feature Guide References
1.2.2.6 Log-in/Log-out
1.18.2 Flexible Buttons
Parameter Selection (for Time Service)
Selects which time modes are switched manually.
Default
All
Value Range
All (Day/Night/Lunch/Break), Day/Night/Break, Day/Night/Lunch, Day/Night
Programming References
4.10.13 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy
Feature Guide References
1.18.2 Flexible Buttons
2.2.4 Time Service
Parameter Selection (for TRS Level Change)
Specifies the TRS level to be used temporarily on a certain PS.
Default
1
Value Range
1–7
Programming References
4.10.13 Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy
Feature Guide References
1.18.2 Flexible Buttons
Parameter Selection (for Time Service - Automatic / Manual)
Specifies the Time Table to be used when the Time Service Switching Mode is set to automatic.