Panasonic KX-TDA50

4.14 ARS [8]
Feature Guide 619
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, and P [Pause])
Programming References
None
Feature Guide References
1.9.1 Automatic Route Selection (ARS)
Trunk Group
Selects the CO line groups that connect to the carrier.
Trunk Group for the Carrier—TRG 01–TRG 64
Enables each CO line group for each carrier.
Default
Enable
Value Range
Disable, Enable
Programming References
None
Feature Guide References
1.9.1 Automatic Route Selection (ARS)
Authorization Code for Tenant
Specifies an Authorization code for each tenant. The Authorization codes can be added to the user-dialed
number by specifying "A" command in Modify Command on the Carrier tab.
Authorization Code for Tenant—Tenant 1–Tenant 8
Specifies the Authorization code of each carrier for each tenant.
Default
Not stored.
Value Range
Max. 10 digits (consisting of 0–9, *, and #)
Programming References
None