Panasonic KX-TDA50 - Page 647

4.17 Maintenance [11]
Feature Guide 647
Error Log Information Print
Specifies whether the PBX error log is printed to the SMDR output.
Default
Print
Value Range
No Print, Print
Programming References
None
Feature Guide References
1.21.1 Station Message Detail Recording (SMDR)
2.4.3 Local Alarm Information
Local Alarm Display Extension 1, Local Alarm Display Extension 2
Specifies the extension numbers of PTs which respond to a local alarm. When the PBX detects that there
are PBX errors, the System Alarm button on the PT turns on red. If pressed, the display will show the error
numbers, and the button turns off automatically.
Default
Not stored.
Value Range
Max. 4 digits (consisting of 0–9)
Programming References
None
Feature Guide References
2.4.3 Local Alarm Information
Daily Test Start Time : Set
Enables the daily self check of the PBX for local alarm and error log.
Default
Disable
Value Range
Disable, Enable
Programming References
None