1.9 Automatic Route Selection (ARS) Features
Feature Guide 91
[Command Explanation]
[Programming Example: Carrier Table]
6. ARS Options
Authorization Code for Tenant
A Carrier Authorization Code can be assigned to each tenant.
Authorization Code for CO Line Group
A Carrier Authorization Code can be assigned to each CO line group.
Itemized Billing Code
An Itemized Billing Code can be assigned for each extension and for each verified code.
If a call is not made from an extension, such as via Direct Inward System Access (DISA) or TIE line,
and no verified code is used, the Itemized Billing Code assigned to location 1 in the Verified Code Table
will be used.
*1
→ ARS Carrier Name [350]
*2
→ ARS CO Line Group for Carrier Access [351]
*3
→ ARS Carrier Access Code [353]
*4
→ ARS Removed Number of Digits for Carrier Access [352]
Command
Description
Inserts the Carrier Access Code
Inserts the user-dialed number minus any removed digits
Public Line: Inserts a pause
Private Line: Inserts a pause and changes dialing mode to tone (DTMF)
Inserts the Authorization Code for Tenant
Inserts the Authorization Code for CO Line Group
Inserts the Itemized Billing Code
You can enter any of these digits in a modify command
C
H
P
A
G
I
[0-9, , #]
In this example
Dialed number: 9-1-212-555-5555
Modification:
9 1 2125555555 0880 2125555555
Remove 1 digit Add the Carrier Access Code
CO Line Access no. is ignored
Carrier A
1, 2, 3
0880
1
CH
Carrier Name
*1
CO Line Group
*2
Carrier Access Code
*3
Removed No. of Digits
*4
Modify Command
Carrier J
4
0700
3
CPH
Carrier 1 Carrier 2
To Next Page
Loading...
