Panasonic KX-UTG200

Value Range
• EAP-MD5
• EAP-TLS
• EAP-FAST
• EAP-PEAP-GTC
• EAP-PEAP-MSCHAPv2
• EAP-TTLS-GTC
• EAP-TTLS-MSCHAPv2
Default Value EAP-MD5
Configuration File Reference IEEE8021X_AUTH_PRTCL (Page 277)
Authentication ID
Description Specifies the authentication ID required for IEEE 802.1X
authentication.
Value Range Max. 127 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Configuration File Reference IEEE8021X_USER_ID (Page 278)
Authentication Password
Description Specifies the authentication password used for IEEE 802.1X
authentication.
Value Range Max. 127 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Configuration File Reference IEEE8021X_USER_PASS (Page 278)
4.3.6 Certificate Information
This screen allows you to display the certificate information for the unit. Detailed information can be displayed
by clicking [Detail]. The following table lists the items displayed when [Detail] is clicked.
Note
• You can export the Built-in Device Root CA certificate by clicking [Export].
Item
Explanation
Status Shows the current status of the certificate.
Version Shows the version number of the certificate.
Serial Number Shows the serial number of the certificate.
Signature Algorithm Shows the signature algorithm of the certificate.
Issuer Shows information for about the issuer of the certificate.
Country Name Shows the country name of the issuer.
Document Version 2015-01 Administrator Guide 107
4.3.6 Certificate Information