4.6 Telephone
This section provides detailed descriptions about all the settings classified under the [Telephone] tab.
4.6.1 Call Control
This screen allows you to configure various call features that are common to all lines.
4.6.1.1 Call Control
Inter-digit Timeout
Description Specifies the length of time, in seconds, within which subsequent digits
of a dial number must be dialed. When this timer expires after the last
key was pressed, dialing will start.
Value Range 1–15
Default Value 5
Configuration File Reference INTDIGIT_TIM (Page 288)
Timer for Dial Plan
Description Specifies the length of time, in seconds, that the unit waits when a "T"
or "t" has been entered in the dial plan.
Value Range 1–15
Default Value 5
140 Administrator Guide Document Version 2015-01
4.6.1 Call Control
To Next Page
Loading...
