Panasonic KX-UTG200

Value Range Max. 1024 characters
Note
• The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url-path>"
– "<user>" must be less than 127 characters.
– "<password>" must be less than 127 characters.
– "<user>:<password>@" may be empty.
– ":<port>" can be omitted if you do not need to specify the
port number.
• If "{mac}" is included in this URL, it will be replaced with the
unit’s MAC address in lower-case.
• If "{MAC}" is included in this URL, it will be replaced with the
unit’s MAC address in upper-case.
• If "{MODEL}" is included in this URL, it will be replaced with the
unit’s model name.
• If "{fwver}" is included in this URL, it will be replaced with the
unit’s firmware version.
• If this URL ends with "/" (slash), "sip.cfg" is automatically added
at the end of the URL.
For example, CFG_MASTER_FILE_PATH="http://host/
dir/" becomes CFG_MASTER_FILE_PATH="http://
host/dir/sip.cfg".
Default Value Empty string
Note
• The URL specified by your phone system dealer may be preset
in the unit.
5.4 System Settings
5.4.1 Login Account Settings
ADMIN_ID
Value Format String
Description Specifies the account ID used to access the Web user interface with
the Administrator account.
Value Range Max. 16 characters (except ", &, ', :, <, >, and space)
Note
• An empty string is not allowed.
Default Value admin
244 Administrator Guide Document Version 2015-01
5.4.1 Login Account Settings