Port Close Timer
Description Specifies the length of time, in minutes, to keep the Web port open when
there has been no communication between the unit and the PC. If the
specified length of time elapses without any communication, the Web
port closes automatically. Communication is detected when you click a
tab, menu item, the [Save] button, or by reloading the application or
pressing the F5 key.
Value Range 1–1440
Default Value 30
4.4.5 Time Adjust Settings
This screen allows you to enable automatic clock adjustment using an NTP server and configure the settings
for DST (Daylight Saving Time), also known as Summer Time.
4.4.5.1 Synchronization
Synchronization by NTP
Description Selects whether to enable the unit to automatically adjust its clock
according to the time information provided by an NTP server.
Document Version 2015-01 Administrator Guide 117
4.4.5 Time Adjust Settings
To Next Page
Loading...
