Panasonic KX-UTG200

Firmware File URL
Description Specifies the URL where the firmware file is stored.
Note
• This setting is available only when [Enable Firmware
Update] is set to [Yes].
• Changing this setting may require restarting the unit.
Value Range Max. 1024 characters
Default Value Not stored.
Configuration File Reference FIRM_FILE_PATH (Page 253)
4.8.4 Local Firmware Update
This screen allows you to manually update the unit’s firmware from a PC by clicking [Update Firmware].
Note
• After the firmware has been successfully updated, the unit will restart automatically.
4.8.4.1 Local Firmware Update
File Name
Description Specifies the path of the firmware file to be imported.
Value Range No limitation
Note
• There are no limitations for the field entry. However, it is
recommended that paths of less than 256 characters be used:
longer paths may cause longer data transfer times and result in
an internal error.
Default Value Not stored.
184 Administrator Guide Document Version 2015-01
4.8.4 Local Firmware Update