Panasonic KX-UTG200

Configuration file type Typical usage
Standard configuration file
(Unique to each device)
Used to configure settings that are unique to each device, such as the
phone number, user ID, password, etc.
Example of a standard configuration file’s URL:
http://prov.example.com/Panasonic/Config{MAC}.cfg
(The corresponding device’s MAC address is used in place of "MAC".)
2.4.4 Priority Given to Each Programming Method
Settings that can be configured via provisioning can also be configured via web programming and phone
programming. The following table explains the priority given to each method.
Priority
Programming method
Highest Web programming and phone programming
Provisioning via the standard configuration file (unique to each device)
Provisioning via the product configuration file (common to each model type)
Provisioning with the master configuration file (common to all devices)
Lowest
Factory default setting for the device
2.4.5 Timing of Configuration File Downloads
Each device can download configuration files at the following times.
– When the device starts up
– At regular intervals
– At a specific time of day
– When directed to download by the SIP server
Regular intervals
Specified by using CFG_CYCLIC_INTVL="{number of minutes}".
For example, CFG_CYCLIC_INTVL="4320" configures the device to download configuration files every three
days (4320 minutes) beginning when the device starts up.
Specific time of day
Specified by using CFG_RESYNC_TIME="{time}". For example, CFG_RESYNC_TIME="23:00" configures the
device to download configuration files each day at 11:00 PM.
When directed by the SIP server
If a setting needs to be applied immediately, the SIP server can send a NOTIFY message to the devices
directing them to download their configuration files. This feature is enabled by specifying
CFG_RESYNC_FROM_SIP in the configuration file.
54 Administrator Guide Document Version 2015-01
2.4.5 Timing of Configuration File Downloads