Panasonic KX-UTG200

Configuration File Reference MACRODIGIT_TIM (Page 288)
International Call Prefix
Description Specifies the number to be shown in the place of the first "+" symbol
when the phone number for incoming international calls contains "+".
Value Range Max. 8 characters (consisting of 0–9, *, and #)
Default Value Not stored.
Configuration File Reference INTERNATIONAL_ACCESS_CODE (Page 289)
Country Calling Code
Description Specifies the country/area calling code to be used for comparative
purposes when dialing a number from the incoming call log that
contains a "+" symbol.
Value Range Max. 8 characters (consisting of 0–9)
Default Value Not stored.
Configuration File Reference COUNTRY_CALLING_CODE (Page 289)
National Access Code
Description When dialing a number from the incoming call log that contains a "+"
symbol and the country calling code matches, the country calling code
is removed and the national access code is added.
Value Range Max. 8 characters (consisting of 0–9, *, and #)
Default Value Not stored.
Configuration File Reference NATIONAL_ACCESS_CODE (Page 289)
Hold Recall Timer
Description Specifies the duration of the hold recall timer. If set to "0", the function
is disabled.
Value Range 0–240 (0: Disable)
Default Value 60
Configuration File Reference HOLD_RECALL_TIM (Page 290)
Document Version 2015-01 Administrator Guide 141
4.6.1 Call Control