Panasonic KX-UTG200

4.4.2.1 Administrator Password
Current Password
Description Specifies the current password to use to authenticate the Administrator
account when logging in to the Web user interface.
Value Range 6–16 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Configuration File Reference ADMIN_PASS (Page 245)
New Password
Description Specifies the new password to use to authenticate the Administrator
account when logging in to the Web user interface.
Value Range 6–16 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Configuration File Reference ADMIN_PASS (Page 245)
Confirm New Password
Description Specifies the same password that you entered in [New Password] for
confirmation.
Value Range 6–16 characters (except ", &, ', :, <, >, and space)
Note
• This value must be the same as the value entered in [New
Password].
Default Value Not stored.
Configuration File Reference ADMIN_PASS (Page 245)
4.4.3 User Password
This screen allows you to change the password used to authenticate the User account when logging in to the
Web user interface.
114 Administrator Guide Document Version 2015-01
4.4.3 User Password