Panasonic KX-UTG200

Note
• For security reasons, the characters entered for the password are masked by special characters, which
differ depending on the Web browser.
4.4.3.1 User Password
Current Password
Description Specifies the current password to use to authenticate the User account
when logging in to the Web user interface.
Value Range 6–16 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Configuration File Reference USER_PASS (Page 245)
New Password
Description Specifies the new password to use to authenticate the User account
when logging in to the Web user interface.
Value Range 6–16 characters (except ", &, ', :, <, >, and space)
Default Value Not stored.
Note
• When a user logs in to the Web user interface for the first time,
after clicking OK on the authentication dialog box, the [Change
User Password] screen is displayed automatically to make the
user set a password.
Configuration File Reference USER_PASS (Page 245)
Confirm New Password
Description Specifies the same password that you entered in [New Password] for
confirmation.
Document Version 2015-01 Administrator Guide 115
4.4.3 User Password