Panasonic KX-UTG200

Authentication Password
Description Specifies the password for the User account. If set, this password must
be entered to access the Web user interface at the User access level.
Value Range Max. 127 characters
Default Value Not stored.
4.3.7.3 Proxy Server Settings
Enable Proxy
Description Selects whether to use the proxy server.
Value Range
• Yes
• No
Default Value No
Proxy Server Address
Description Specifies the IP address or FQDN of the proxy server.
Value Range Max. 127 characters
Note
• You cannot leave this field empty if [Enable Proxy] is set to
[Yes].
Default Value Not stored.
Proxy Server Port
Description Specifies the port number of the proxy server.
Value Range 1–65535
Default Value 8080
4.3.8 Global Address Detection
This screen allows you to configure STUN server settings for the Global Address Detection feature. The global
IP address of the network the unit is connected to will be detected by STUN Protocol. If the global IP address
has changed, the new address will be registered to the SIP server.
Document Version 2015-01 Administrator Guide 111
4.3.8 Global Address Detection