Panasonic KX-UTG200

No Answer (Phone Number)
Description Specifies the phone number of the destination to forward calls to when
a call is not answered after it has rung a specified number of times.
Note
• If you change this setting when [Feature Key
Synchronization] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range
• Max. 32 characters for phone number format
• Max. 127 characters (except ", &, ', ;, <, >, and space)
Note
• You cannot leave this field empty if [No Answer (Enable Call
Forward)] is set to [Yes].
Default Value Not stored.
Configuration File Reference FWD_NO_ANSWER_NUMBER (Page 332)
No Answer (Ring Count)
Description Specifies the number of times that an incoming call rings until the call
is forwarded.
Note
• If you change this setting when [Feature Key
Synchronization] is set to [Yes], the change to this setting is
not immediately applied on this screen. In this case, reload the
screen to confirm that the change is applied.
Value Range 0, 2–20 (0: No ring)
Default Value 3
Configuration File Reference FWD_NO_ANSWER_TIMEOUT (Page 333)
152 Administrator Guide Document Version 2015-01
4.6.2 Call Control [Line 1]–[Line n]