Panasonic KX-UTG200

Default Value Empty string
STATIC_DNS2_SVR
Value Format String
Description Specifies the IP address of the secondary DNS server.
Note
• This setting is available only when "DHCP_ENABLE" is set to
"N".
Value Range Max. 15 characters (IP address in dotted-decimal notation)
Default Value Empty string
DHCP_INFORM_ENABLE
Value Format Boolean
Description Specifies whether or not to send DHCP INFORM packets.
Value Range
• Y/Yes (Send DHCP INFORM packet out to request information)
• N/No (Do not send DHCP INFORM packet)
Default Value
N
HOST_NAME
Value Format String
Description Specifies host name of the device.
Value Range 0-64 characters
Default Value {MODEL}
5.5.2 IPv6 Settings
IP_ADDR_MODE
Value Format Integer
Description Specifies the IP address mode.
Value Range 0-2
– 0: IPv4
– 1: IPv6
– 2: dual
Default Value 2
270 Administrator Guide Document Version 2015-01
5.5.2 IPv6 Settings